reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
VERMONT GAGE

Spacer, Spacer Type Round, For Screw Size 3/8 in, Overall Length 2 1/2 in, Inside Diameter 0.38 in, Outside Diameter 0.75 in, Retaining Rib Diameter Not Applicable, Material Brass, Finish Zinc Plated, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM B16, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.01 in, Outside Diameter Tolerance +/-0.005 in, Overall Length Tolerance +/-0.005 in, Rockwell Hardness B55
  • Spacers & Standoffs,Round Spacers
  • USA INDUSTRIALS
    • Case-Hardened 1060 Carbon Steel Linear Shafts, System of Measurement Inch
  • Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Linear Shafts & Support Rails
  • USA INDUSTRIALS
    • Hex Standoff, Thread Size M3-0.5, Standoff Thread Gender Female-Female, Overall Length 6 mm, Body Length 6 mm, Thread Length 6 mm, Body Thread Length 6 mm, Hex Width 8 mm, Square Size Not Applicable, Outside Diameter 8 mm, Shape Hex, Material Aluminum, Finish Plain, Pack Size Small Pack, System of Measurement Metric, Color Silver, Hex Width Tolerance +/-0.13 mm
  • Spacers & Standoffs,Hex Standoffs
  • USA INDUSTRIALS
    • Spacer, Spacer Type Round, For Screw Size M3, Overall Length 2 mm, Inside Diameter 3.2 mm, Outside Diameter 4.5 mm, Retaining Rib Diameter Not Applicable, Material Aluminum, Finish Plain, Pack Size Small Pack, System of Measurement Metric, Hex Width Not Applicable, Color Silver, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance +/-0.13 mm, Outside Diameter Tolerance +/-0.13 mm, Overall Length Tolerance +/-0.13 mm, Rockwell Hardness B50, Tensile Strength 45,000 psi
  • Spacers & Standoffs,Round Spacers
  • USA INDUSTRIALS
    • Black-Coated Steel Pipe Nipple, Application Air, Natural Gas, Oil, Potable Water, Steam, Finish/Coating Black Coated, Fitting Compatibility Schedule 40, Gravity Flow No, Inside Diameter 13/16 in, Manufacture Location Globally Sourced, Material Steel, Material Grade Not Applicable, Maximum Operating Pressure 125 psi, Maximum Operating Temperature 225 Degrees F, Maximum Steam Pressure 300 psi, Metal Pipe Construction Welded, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 3/4 in
  • Pipes,Valves & Fittings,Fittings,Black Pipe Fittings
  • ZORO SELECT
    • Gasket, X-Ray Detectable Not Applicable, Mesh Size Not Applicable
  • Plumbing Repair & Maintenance,Plumbing Parts & Accessories,Gaskets,Hardware,& O-Rings
  • ZORO SELECT
    • Hex Standoff, Thread Size M5-0.8, Standoff Thread Gender Male-Female, Body Length 8 mm, Thread Length 9.5 mm, Body Thread Length 4 mm, Hex Width 8 mm, Square Size Not Applicable, Outside Diameter 8 mm, Shape Hex, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Metric, Color Silver, Stud Thread Length 9.5 mm, Material Quality Standards ASTM A582, Hex Width Tolerance +/-0.13 mm
  • Spacers & Standoffs,Hex Standoffs
  • USA INDUSTRIALS
    • Spacer, Spacer Type Round, For Screw Size 3/8 in, Overall Length 1/2 in, Inside Diameter 0.38 in, Outside Diameter 0.75 in, Retaining Rib Diameter Not Applicable, Material Brass, Finish Zinc Plated, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM B16, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.01 in, Outside Diameter Tolerance +/-0.005 in, Overall Length Tolerance +/-0.005 in, Rockwell Hardness B55
  • Spacers & Standoffs,Round Spacers
  • USA INDUSTRIALS
    • Coupling, Stainless Steel, 316, Class Class 150, 2 in, Female, BSPP, 11, 2 in, Female, BSPP, 11, 150 psi Maximum Operating Pressure
  • Pipes,Valves & Fittings,Fittings,Stainless Steel Pipe Fittings
  • ZORO SELECT
    • O-Ring, Yes Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.
  • Sealing & Gasketing,Individual & Bulk O-Rings
  • ZORO SELECT
    • O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.
  • Sealing & Gasketing,Individual & Bulk O-Rings
  • ZORO SELECT
    • Reducing Hex Nipple, Brass, Nickel-Plated, Class Class 1000, 1/4 in, Male, NPTF, 18, 1/8 in, Male, NPTF, 27, 1,000 psi Maximum Operating Pressure
  • Pipes,Valves & Fittings,Fittings,Brass Pipe Fittings
  • ZORO SELECT
    • Insulating Bushing, Iron, Trade Size 2 1/2 in, Overall Length 15/16 in, Finish Zinc Plated, Insulated Yes, Compatible Conduit Type IMC, RMC, Thread Type NPT, Thread Gender Female, Conduit Fitting Type Bushing, Standards CSA Certified, UL Listed, For Use With Fittings, Threaded RMC, For Conduit Type IMC, RMC, Overall Height 3 1/4 in, Overall Width 3 1/4 in, Weight 0.37 lb, Color Gray, Compatible Conduit Trade Size 2 1/2 in, Connection Type Threaded, Inside Diameter 2.29 in
  • Conduit & Raceways,Conduit Fittings
  • RACO
    • Cutting Board, HDPE, Grade Standard, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 0.5 in, Yellow, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 2.99 ft-lb/in, Friction Coefficient 0.22, Temperature Range -100 Degrees to 180 Degrees F, Plastic Hardness 64D
  • Plastics,Plastic Sheets
  • ZORO SELECT
    • Sheet Stock, PETG, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.1875 in, Clear, Plastic Clarity Clear, Tensile Strength 7,700 psi, Impact Strength 1.7 ft-lb/in, Water Absorption 0.2 Percent, Temperature Range -40 Degrees to 153 Degrees F, Plastic Hardness Rockwell R115
  • Plastics,Plastic Sheets
  • ZORO SELECT
    • Rod Stock, Polycarbonate, Grade Standard, Plastic Length 8 ft, Plastic Diameter 1 1/2 in, Clear, Plastic Clarity Clear, Minimum Temperature -40 Degrees F, Maximum Temperature 250 Degrees F, Tensile Strength 10,500 psi, Impact Strength 1.5 ft-lb/in, Water Absorption 0.2 Percent, Plastic Hardness Rockwell M75
  • Plastics,Plastic Rods
  • ZORO SELECT
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 18.91, Tolerance +.000/-.005, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.8764 in, Diameter Increment 0.0001 in, Diameter Range 0.7601 in to 1.0000 in, Diameter Sub-Range 0.8751 in to 0.8800 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00006 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.1809 in, Diameter Increment 0.0001 in, Diameter Range 0.0751 in to 0.2810 in, Diameter Sub-Range 0.1801 in to 0.1850 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 14.12, Tolerance +.005/-.000, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 0.1695, Tolerance +.0000/-.0002, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.8689 in, Diameter Increment 0.0001 in, Diameter Range 0.7601 in to 1.0000 in, Diameter Sub-Range 0.8651 in to 0.8700 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00006 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 0.7110, Tolerance +.0002/-.0000, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.1023 in, Diameter Increment 0.0001 in, Diameter Range 0.0751 in to 0.2810 in, Diameter Sub-Range 0.1001 in to 0.1050 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 0.5705, Tolerance +.0002/-.0000, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 0.2855, Tolerance +.0002/-.0000, Overall Length 2 in
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.0266 in, Diameter Increment 0.0001 in, Diameter Range 0.0251 in to 0.0750 in, Diameter Sub-Range 0.0251 in to 0.0300 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.1390 in, Diameter Increment 0.0001 in, Diameter Range 0.0751 in to 0.2810 in, Diameter Sub-Range 0.1351 in to 0.1400 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class ZZ No-Go Pin Gauge, Material Steel, Finish Black Oxide, Diameter 0.6320 in, Diameter Increment 0.0005 in, Diameter Range 0.6260 in to 0.7505 in, Diameter Sub-Range 0.6260 in to 0.6500 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 10 Microinch or Better, Tolerance 0.00020 in, Tolerance Class ZZ, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.3765 in, Diameter Increment 0.0001 in, Diameter Range 0.2811 in to 0.4060 in, Diameter Sub-Range 0.3751 in to 0.3800 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025
  • Measuring & Marking Tools,Precision Measuring Tools,Precision Gauges & Accessories
  • VERMONT GAGE
    • PREVIOUS 60931 60932 60933 60934 60935 60936 60937 60938 60939 60940 60941 60942 60943 60944 60945 60946 60947 NEXT