Thread Forming Tap, Thread Size 1/4 In.-28, UNF, Overall Length 2 1/2 In, Cobalt, TiCN, Right Hand, Thread Length 11/16 In, 75 Percent Thread Drill Size 5.90 Mm, Thread Limit H8

Pipes,Valves & Fittings,Tubing,Stainless Steel Tubing

Tubing, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Type Not Applicable, Fabrication Seamless, Inside Diameter 0.51 in, Material 316 Stainless Steel, Material Grade 316, Maximum Operating Pressure 5,364 psi @ 72 Degrees F, Maximum Operating Temperature 1,500 Degrees F, Outside Diameter 3/4 in, Overall Length 6 ft, Resistance Properties Corrosion Resistant, Pitting Resistant, Standards ASTM A213, ASTM A269, Temper Annealed, Tube Form Straight, Wall Thickness 0.12 in

Seamless 316 Stainless Steel Tubing.

ZORO SELECT

SS Bar/Rod,15-5,2 O.D.,3 ft.

.D.

SS Bar/Rod,15-5,2.500 O.D.,6 ft.

D.O.

Alloy Steel,Alloy Steel Rods

Alloy Bar/Rod, 9310, 6.500 O.D., 5 ft.

.D. Alloy Bar/Rod,,9310,6.

SS Bar/Rod,304,.5 x 1.5 Thick,1 ft.

SS Bar/Rod,304,.

Alum Bar/Rod,7075,1.25 x 2 Thick,3 ft.

. Alum Bar/Rod,7075,1.

Aluminum,Aluminum Rods

Faucets,Faucet Repair and Maintenance

Flex Hose Set, 3/8 in Inlet

Flex Hose Set, Stainless Steel.

SPEAKMAN

Swivel Stem Caster,Expanding Adapter,5 In.

: 1.303".

Casters & Wheels,Casters,Stem Casters

CC APEX

Spiral Flute Tap, Thread Size #4-40, UNC, Overall Length 1 7/8 in, High Speed Steel, TiN, Thread Length 9/16 in, 75 Percent Thread Drill Size 2.20, Thread Limit Not Rated, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 2

Spiral Flute Tap, #4-40, Bottoming, 2 Flutes, UNC.

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

Screw Machine Drill Bit, Drill Bit Size V, Drill Bit Point Angle 130 Degrees , Notched Point, Cobalt, TiN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.3770

Screw Machine Drill Bit, V Size, 130 Degrees Point Angle, Cobalt Steel, TiN Finish, Spiral Flute.

Cutting Tools,Taps,Thread Forming Taps

Screw Thread Insert STI Tap, Thread Size M22x2.5, Metric, Overall Length 160.00 mm, Cobalt, TiCN, Right Hand, Thread Length 25.00 mm, Tap Chamfer Modified Bottoming, Semi-Bottoming, Thread Limit D10, Number of Flutes 0

50, Modified Bottoming, TiCN, 0 Flutes.Thread Forming Tap, M22-2.

Cutting Tools,End Mills,Corner Radius End Mills

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, EXO, Straight, Fractional Inch, 0.03 in, 1 in, 3 1/2 in

0300" rad.Cor Rad End Mill,1/2",Carb,0.

Cutting Tools,End Mills,Square 2-Flute End Mills

Carbide End Mill,18mm dia.,36.00mm Cut

00 mm Square End Mill, 18.00 mm, Shank Dia.16., Carbide, WXL, Straight, Length of Cut 36.

Cutting Tools,End Mills,Corner Radius End Mills

Corner Radius Carbide End Mills, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Shrink Fit, Fractional Inch, 0.03 in, 1 1/8 in, 4 in

Corner Radius Carbide End Mills.

Cutting Tools,Taps,Spiral Point 2-Flute Taps

Spiral Point Tap, Thread Size #8-32, UNC, Overall Length 2 1/4 in, High Speed Steel, Black Oxide, Right Hand, Thread Length 7/16 in, 75 Percent Thread Drill Size 3.40 mm, Thread Limit H5, Class of Fit JIS 2, Number of Flutes 2

Spiral Point Tap, #8-32, Plug, UNC, 2 Flutes, Oxide.

Cutting Tools,End Mills,High Speed Steel End Mills

HSS End Mill,2in.dia.,3in.Cut L

2 in Square End Mill, 2 in Milling Dia..

Cutting Tools,Taps,Straight Flute 4-Flute Taps

Straight Flute Tap, Thread Size M18x1.5, Metric Fine, Bottoming, Overall Length 102.00 mm, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 37.00 mm, 75 Percent Thread Drill Size 14.50 mm, Thread Limit D6

50 , Bottoming , 4 Flutes,.Straight Flute Hand Tap , M18-1.

Cutting Tools,Taps,Straight Flute 3-Flute Taps

Straight Flute Tap, Thread Size M5x0.8, Metric Coarse, Plug, Overall Length 60.00 mm, High Speed Steel, Black Oxide, Right Hand, Thread Length 11.00 mm, 75 Percent Thread Drill Size 4.20 mm, Thread Limit D5

Straight Flute Hand Tap , M5-0.

Cutting Tools,Taps,Straight Flute 3-Flute Taps

Straight Flute Tap, Thread Size #10-24, UNC, Plug, Overall Length 2 11/32 in, Cobalt, Bright (Uncoated), Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size #25, Thread Limit H3

Straight Flute Hand Tap , #10-24 , Plug , 3 Flutes, UNC.

Cutting Tools,End Mills,Square End Mills

Square End Mill, 3/8 in Milling Dia., Carbide, EXO, Non-Coolant Through, Shrink Fit, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia.

3/8 in, Neck Dia. Not Applicable Square End Carbide End Mills.

Cutting Tools,Taps,Spiral Point Taps

Spiral Point Tap, Thread Size M10x1.25, Metric Fine, Overall Length 100.00 mm, VC-10, TiCN, Right Hand, Thread Length 17.00 mm, 75 Percent Thread Drill Size 0.3438 in, Thread Limit D5, Class of Fit JIS 2, Number of Flutes 3

Spiral Point Tap , M10x1.25 , Modified Bottom, Semi-Bottom , 3 Flutes.

Cutting Tools,Taps,Straight Flute 4-Flute Taps

Straight Flute Tap, Thread Size 5/16 In.-18, UNC, Plug, Overall Length 2 23/32 in, High Speed Steel, TiCN, Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size F, Thread Limit H10

Straight Flute Hand Tap , 5/16"-18 , Plug , 4 Flutes, UNC.

Cutting Tools,Drill Bits,Jobber Length Drill Bits

Jobber Length Drill Bit, Drill Bit Size 13.50 mm, Drill Bit Point Angle 120 Degrees , Powdered Metal, V, Decimal Equivalent 0.5315, Metric, Drill Bit Point Type R Thinning Point, Non-Coolant Through

50mm,XPM.Jobber Drill Bit,13.

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

Spiral Flute Tap, Thread Size #8-32, UNC, Overall Length 2 3/32 in, Powdered Metal, TiCN, Thread Length 1/4 in, 75 Percent Thread Drill Size 3.40, Thread Limit H4, Thread Direction Right Hand, Number of Flutes 2

Spiral Flute Tap, #8-32, Modified Bottoming, 2 Flutes, UNC.

Cutting Tools,End Mills,Corner Radius End Mills

Corner Radius Carbide End Mills, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Shrink Fit, Fractional Inch, 0.12 in, 3 in, 6 in

Corner Radius Carbide End Mills.

Cutting Tools,Taps,Thread Forming Taps

Thread Forming Tap, Thread Size 5/8 In.-11, UNC, Overall Length 3 13/16 in, Cobalt, TiN, Right Hand, Thread Length 1 1/16 in, 75 Percent Thread Drill Size 37/64 in, Thread Limit H8

Thread Forming Tap, 5/8"-11, Plug, TiN, 0 Flutes.

Cutting Tools,Taps,Thread Forming Taps

Thread Forming Tap, Thread Size 1/4 In.-28, UNF, Overall Length 2 1/2 in, Cobalt, TiCN, Right Hand, Thread Length 11/16 in, 75 Percent Thread Drill Size 5.90 mm, Thread Limit H8

Thread Forming Tap, 1/4"-28, Plug, TiCN, 0 Flutes.

Cutting Tools,End Mills,Ball 2-Flute End Mills

Ball End Mill, 2 mm Milling Dia., Carbide, WXL, Non-Coolant Through

26mm Cut L.Carbide End Mill,2.00mm dia,1.

Cutting Tools,End Mills,Ball 4-Flute End Mills

Ball End Mill, 22 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

0mm D,38mm Cut.Carbide End Mill, 22.