Durometer, USB And WiFi For Data Transmission
About The The PCE-2900 hardness meter is equipped with a backlit colour display. Likewise, the buttons on the PCE-2900 are illuminated. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle
The PCE-2900 hardness meter is equipped with a backlit colour display. The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. The memory thus allows a documentation of the measured values. An impactor bounces on the workpiece via a firing pin and the metal hardness is measured via the rebound. Via the integrated USB and WiFi interface, the measured values can be transferred from the hardness tester via software to a PC. Thus, the display can be read well even in low light conditions. The impact device is connected to the hardness tester via a cable. The hardness tester PCE-2900 has an internal memory of 6 x 100 measurement sets. The hardness tester is powered by commercially available 1.5V AA batteries and has a battery life of about 50 hours. Likewise, the buttons on the PCE-2900 are illuminated. The hardness tester measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore.
Measuring & Marking Tools,Measuring and Layout Tools,Hardness Testers
Durometer, USB And WiFi For Data Transmission
Measuring & Marking Tools,Measuring and Layout Tools,Hardness Testers
Specifications of Durometer, USB And WiFi For Data Transmission | |
|---|---|
| Category | |
| Instock | instock |
