- USB1.1 port allows for information to be uploaded directly to a PC. - Calibration function is available. - Large screen (128x64 dot matrix LCD), allows for clear display of all functions and parameters - Hardness test can be taken at any angle including inverted. Hardness results are directly displayed in HRB, HHRC, HV, HB, HS, HL hardness scales. Up to 150 hours of continuous operation battery life between charges. - Diameter of carbide ball: 3mm. -6V Ni-MH rechargeable battery are supplied. The batteries can be charged with the integrated charger. - Range: (170-860)HLD, (17-68.5)HRC, (19-651)HB - Accuracy: HLD: ±5, HRC: ±1, HB: ±4 - With - Impact device - Hardness test block - Small support ring - Cleaning brush - Battery charger - Paper for printing - Manual - DataPro software - Communication cable - A wide measuring range supports the hardness of all metallic materials. -¬è Upper and lower limit can be preset. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale are available. (eL off and no printing) - Automatic power off after five minutes. An audio alarm will automatically sound when the reading is outside of the preset limits. -¬è High speed thermal printer allows for the readings to be immediately printed. - Large capacity memory storage of 500 sub groups. - Battery voltage information is displayed including the charge status.
Measuring & Marking Tools,Measuring and Layout Tools,Hardness Testers
Asimeto Impact Hardness Tester
Specifications of Asimeto Impact Hardness Tester | |
---|---|
Category | |
Instock | instock |