Rotary Gripper Module EHMD-40-RE-GE-16

Type Of Actuation=Electrical, Assembly Position=Any, Switching Position Indicator=No, Duty Cycle=100 %, Insulation Class=H Solenoid Coil Vacc-S18-120-A1-1A For Armature System F10, Connection Pattern Type A, To En 175 301, 24 V Ac/50-60 Hz.

Valve Function=3/2 Closed, Monostable, Type Of Actuation=Electrical, Width=30 Mm, Standard Nominal Flow Rate=50 L/Min, Operating Pressure=1 - 16 Bar Pilot Valve Mdh-3/2-230Vac Directly Actuated, With Solenoid Coil And Manual Override, Without Plug Socket.

.Centre Of Gravity Distance From Working Load To Yoke Plate=50 Mm, Stroke=25 Mm, Piston Diameter=63 Mm, Operating Mode Of Drive Unit=Yoke, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends Guided Drive Dfm-63-25-P-A-Gf With Integrated Guide.

Push-In Fitting NPQR-L-G14-Q8.

Number Of Valve Positions=10, Operating Pressure=0 - 8 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [7:4:4], Note On Operating And Pilot Medium=Lubricated Operation Possible (Subsequently Required For Further Operation), Corrosion Resistance Classification Crc=2 - Moderate Corrosion Stress Manifold Block MHA1-PR10-3-PI-PCBM.

Stroke=40 Mm, Piston Diameter=63 Mm, Piston Rod Thread=M16X1,5, Cushioning=Ppv: Pneumatic Cushioning Adjustable At Both Ends, Assembly Position=Any Standards-Based Cylinder Dnc-63-40-Ppv-A As Per Iso 15552, With Profile Cylinder Barrel, For Proximity Sensing, With Adjustable Cushioning At Both End Positions.

Rotary Gripper Module EHMD-40-RE-GE-16.

Sub-Base PBL-3/4-D-MIDI-L.

Rotary Gripper Module EHMD-40-RE-GE-16.

Sub-Base PBL-3/4-D-MIDI-L.