Cage Nut, #10-32, Steel, Not Graded, Zinc Plated Finish

A machine screw, also called a stove bolt, is generally a smaller fastener threaded the entire length of its shank.

5/8" x 1" x 14 GA Zinc Plated Steel Machine Bushings 20PK.

Class 8.50 Hex Head Cap Screw, Zinc Plated Steel, 40 mm L, 8 PK.8, M10-1.

Socket screws are commonly used in assemblies that do not provide sufficient clearance for a conventional wrench or socket. M12-1.

.

Commonly used with flat or lockwashers.. Especially useful in metal-to-metal or where heavy duty fastening is required.

Sheet Metal Screw, 1/4" x 7/8 in, Zinc Plated Steel Hex Head Hex Drive, 384 PK.

The nut is usually slightly loose in the cage to allow for minor adjustments in alignment.The cage has two wings that when compressed allow the cage to be inserted into the square holes in equipment racks, and when released hold the nut in position behind the hole.

Sheet Metal Screw, 1/4" x 7/8 in, Zinc Plated Steel Hex Head Hex Drive, 384 PK.

The nut is usually slightly loose in the cage to allow for minor adjustments in alignment.The cage has two wings that when compressed allow the cage to be inserted into the square holes in equipment racks, and when released hold the nut in position behind the hole. Cage Nut, #10-32, Steel, Not Graded, Zinc Plated Finish.