CntrlFlx Cplng Hub, Double, Bore 11mm, OD56.0mm, Aluminum,MCPTD56-11-A
About The It has a balanced design and can accommodate speeds of up to 10000 RPM. The use of two inserts allows for higher torque capacity than single insert styles. The multiple piece construction allows for a highly customizable coupling that easily combines clamp hubs with inch, metric, keyed, and keyless bores
It has a narrow width for use in applications with short shafts that may not be able to protrude completely through the clamp of a regularly sized hub. This Controlflex hub is RoHS and REACH compliant and manufactured by Schmidt Kupplung in Germany. The use of two inserts allows for higher torque capacity than single insert styles. The multiple piece construction allows for a highly customizable coupling that easily combines clamp hubs with inch, metric, keyed, and keyless bores. It is longer than equivalent single insert Controlflex types to couple systems with wide distances between shaft ends. This clamp style double insert type thin hub requires the user to mate it with one other hub and two acetal inserts. It has a balanced design and can accommodate speeds of up to 10000 RPM. Ruland supplied Controlflex couplings are a lightweight, low inertia, and zero-backlash coupling designed for use in encoders, tachometers, resolvers, and light duty power transmission applications. This hub has a 11mm bore, 56.0mm OD, and 12.0mm length.
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
CntrlFlx Cplng Hub, Double, Bore 11mm, OD56.0mm, Aluminum,MCPTD56-11-A
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
Specifications of CntrlFlx Cplng Hub, Double, Bore 11mm, OD56.0mm, Aluminum,MCPTD56-11-A | |
|---|---|
| Category | |
| Instock | instock |
