Adaptor Quick-IN Fein-3/4 Weldon

Name: Adaptor Quick-In Fein-3/4 In.? EUROBOOR
Brand: EUROBOOR
SKU: CBFX-697539
Price: 51.29 USD
Availability: InStock

About The 05 mm, Shank Diameter 3/4 in. Weldon, Design External to 19.Adaptor Quick-In Fein-3/4 In

Adaptor Quick-In Fein-3/4 In. Weldon, Design External to 19.05 mm, Shank Diameter 3/4 in

Cutting Tools,Magnetic Drill Press Arbors and Adaptors

Precision Bit Halfmoon-Shank 4mm,PK10, Package Quantity 10

Linear Metric Support Rail, Shaft Material Grade 1060, Length Tolerance +0/-3.2 mm, For Use With Linear Shaft, System of Measurement Metric, Support Rail Drilling Pre-Drilled, Center Height 42 mm, Rail Base Overall Width 60 mm, Rail Top Width 12.7 mm, Rail Mount Hole Center to Center Length 200 mm, Rail Mount Hole Center to Center Width 42 mm, Rail End to Hole 100 mm, Rail Mount Hole Thread Size M8 x 1.25, Product Type Linear Support Rail, Shaft Diameter 25 mm, Shaft Length 1,000 mm

Cutting Tools,Magnetic Drill Press Arbors and Adaptors

Specifications of Adaptor Quick-IN Fein-3/4 Weldon
Category
Instock	instock

Last Updated May 5th, 2024 06:04 pm

More Varieties

Rating :- 9.82 /10

Votes :- 17

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape X, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Sealing & Gasketing,Individual & Bulk O-Rings

ZORO SELECT

Motion Control Coupling Hub, Angular Misalignment 0.5 Degrees , Axial Motion 0.2 mm, Coupling Size MOCC51, Outside Diameter 50.8 mm, Over-Standard Parallel Misalignment 5.08 mm, Parallel Misalignment 0.25 mm, Coupling Overall Length 59.7 mm, Hub Material Aluminum, Length through Bore 20.8 mm, System of Measurement Metric, Bore Diameter 16 mm, Maximum Speed 4,500 RPM, Bore Type Round Keyed, Shaft Locking Type Clamp On, Keyway Depth 2.4 mm, Keyway Width 5 mm, Screw Seating Torque 9.5 N-m

Coupling Hub,Oldham Clamp,16mm.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Rigid Clamp Couplings

RULAND

Jaw Coupling Hub, Coupling Size MJS33, Outside Diameter 33.3 mm, Coupling Overall Length 44.5 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 8 mm, Shaft Locking Type Set Screw, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 33.3 mm

Jaw Coupling Hub,8mm,Aluminum.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Jaw Type Couplings

RULAND

Shaft Collar, System of Measurement Metric with Inch Bore, Bore Type Round, Bore Diameter 3/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 40 mm, Inside Height to Flat Not Applicable, Clearance Diameter 47.4 mm, Collar Width 15 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Thread Direction Not Applicable, Center to Lever Top Not Applicable, Collar Construction 2-Piece, Screw Material Alloy Steel

SHAFT COLLAR.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Shaft Collars

RULAND

Pressure Transmitter, Minimum Pressure 0 psi, Maximum Pressure 500 psi, Electrical Connections 3-Pin Packard Connector, Output 4 to 20mA DC, Accuracy +/-1.50 Percent, Number of Wires 2, Process Connection Gender Male, Process Connection Size 1/4 in, Process Connection Type SAE 45 Degrees Flare, Power Required 9 to 32V DC, IP Rating IP67, Series P599, Maximum Operating Temperature 212 Degrees F, Minimum Operating Temperature -40 Degrees F, Housing Material Stainless Steel

Pressure Transducer,304L SS,0 to 500 psi.

Pressure & Vacuum Measuring,Pressure Transducers

JOHNSON CONTROLS

Linear Metric Support Rail, Shaft Material Grade 1060, Length Tolerance +0/-3.2 mm, For Use With Linear Shaft, System of Measurement Metric, Support Rail Drilling Pre-Drilled, Center Height 42 mm, Rail Base Overall Width 60 mm, Rail Top Width 12.7 mm, Rail Mount Hole Center to Center Length 200 mm, Rail Mount Hole Center to Center Width 42 mm, Rail End to Hole 100 mm, Rail Mount Hole Thread Size M8 x 1.25, Product Type Linear Support Rail, Shaft Diameter 25 mm, Shaft Length 1,000 mm

Linear Metric Support Rail,25 mm dia..

Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Linear Shafts & Support Rails

PBC LINEAR