reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
RULAND

Keyed Clamp Oldham Cplg Hub, Bore 0.375, OD 1.313, Stainless Steel

About The 9 standards for maximum torque capabilities.590" length. The addition of a keyway allows for increased torque capacity and prevents the coupling from slipping on the shaft when over torqued

The complete coupling has a balanced design and can accommodate speeds of up to 4,500 RPM. The addition of a keyway allows for increased torque capacity and prevents the coupling from slipping on the shaft when over torqued. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Disks are available in three materials allowing the user to tailor coupling performance to system requirements. It has a 0.375" bore, 3/32" keyway, 1.313" OD, and 0.590" length. The multiple piece construction allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores. Stainless steel hubs can be used in high corrosion, high temperature, and cleanroom environments when combined with a PEEK disk. This oldham coupling hub is RoHS and REACH compliant. This keyed clamp style hub is a component in a three piece design which mates two stainless steel hubs to a disk insert. Ruland oldham couplings are zero-backlash and designed for use in applications with high parallel misalignment (up to 10% of the OD).

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings

Keyed Clamp Oldham Cplg Hub, Bore 0.375, OD 1.313, Stainless Steel

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings

Specifications of Keyed Clamp Oldham Cplg Hub, Bore 0.375, OD 1.313, Stainless Steel

Category
Instockinstock

Last Updated

Keyed Clamp Oldham Cplg Hub, Bore 0.375, OD 1.313, Stainless Steel
More Varieties

Rating :- 9.49 /10
Votes :- 18
Gauge,2",30/0 VAC,1/8"CBM,SS,FrontFlange

Gauge,2",30/0 VAC,1/8"CBM,SS,FrontFlange

Gauge,2",30/0 VAC,1/8"CBM,SS,FrontFlange.

  • Pressure & Vacuum Measuring,Pressure Gauges
  • PIC GAUGES
    • It is compact and can fit in smaller envelopes than equivalent single beam or double insert Controlflex styles.
  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD).
  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment.

    It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment.

    1mm outer diameter, and a 111. The user can add boots to protect the joints from unwanted contaminants and increase service life.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • It is compact and can fit in smaller envelopes than equivalent single beam or double insert Controlflex styles.
  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings.

    The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings.

    0mm, Aluminum This short style slit coupling can fit in confined spaces where the long style may not fit. It is set screw style and has 6mm x 3mm bores, 13. This slit coupling is manufactured by Reliance Precision Ltd.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • It has a 0.375" bore, 3/32" keyway, 1.313" OD, and 0.590" length.

    It has a 0.375" bore, 3/32" keyway, 1.313" OD, and 0.590" length.

    Disks are available in three materials allowing the user to tailor coupling performance to system requirements. This oldham coupling hub is RoHS and REACH compliant.375", OD 1.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD).
  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • It has a 0.375" bore, 3/32" keyway, 1.313" OD, and 0.590" length.

    It has a 0.375" bore, 3/32" keyway, 1.313" OD, and 0.590" length.

    The complete coupling has a balanced design and can accommodate speeds of up to 4,500 RPM. The multiple piece construction allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores. Disks are available in three materials allowing the user to tailor coupling performance to system requirements.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD).

    It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD).

    4mm) outer diameter, and a 7. This single universal joint is made of a block, two pins, and two yokes.000" (177.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND