SAE Split Flange Halves, CF 6000 PSI, Size 1 1/4'', 15.0
About The The O-ring seal is compressed between the bottom of the groove in the flange head and the flat surface of the port or flange pad, providing a reliable soft seal. tube ISO 6162-1 only - Much lower tightening torque required from the four bolts compared to equivalent threaded size port. The captive ones are also offered with either drilled or tapped bolt holes
It is a static face seal using a high durometer O-ring for the seal and clamps and bolts for holding power. The connection's success is in its simplicity. Flange clamps are used for providing the holding power to the 4 bolt flange connection. The captive ones are also offered with either drilled or tapped bolt holes. - Less tightening torque means smaller wrenches and wrench swing clearances - providing ease of assembly in tight working environment. The captive flange clamp with tapped holes is used while connecting a tube to another tube or a hose. This simple design provides several advantages over threaded port connections, such as NPT, SAE, BSPP, ISO 6149 etc., in larger sizes: - Ability to connect up to 5 inch O.D. tube ISO 6162-1 only - Much lower tightening torque required from the four bolts compared to equivalent threaded size port. - Single seal point between tube/pipe/hose assembly and the port - Ease of disassembly through use of split clamps They are offered in split and captive one-piece versions. Markets: - Environment - Industrial - Machine Tools - Marine - Materials Handling - Mobile Industries - Power Generation - Press Building Applications: - Suitable for general hydraulic and industrial applications. They also enable an easy removal of the flange head component, such as a hose assembly, by loosening all four bolts and removing one clamp half. - Up to 6000 psi capability through 3'' size ISO 6162-2 only - Use up to 420 bar at the ISO 6164 flange sizes from 3/8'' to 4''. 4 bolt flange connection ISO 6162-1/2 SAE J518 Code 61/62 and ISO 6164 is a proven leak-free connection, especially suited for larger sizes. The O-ring seal is compressed between the bottom of the groove in the flange head and the flat surface of the port or flange pad, providing a reliable soft seal. The split clamps make it easy to assemble the connection in close quarters. As a result, it has achieved worldwide acceptance.
Bearings,V-belts & Power Transmission Equipment,Gear Drives & Speed Reducers,Flange Coupling Kits
SAE Split Flange Halves, CF 6000 PSI, Size 1 1/4'', 15.0
Bearings,V-belts & Power Transmission Equipment,Gear Drives & Speed Reducers,Flange Coupling Kits
Specifications of SAE Split Flange Halves, CF 6000 PSI, Size 1 1/4'', 15.0 | |
|---|---|
| Category | |
| Instock | instock |
