JW Winco WN36.1-125-R25-C Base Plate

.

.1 mini indexing plungers feature small, compact dimensions. GN 822. Plungers are inserted into position by holding them by the knurled knob.

.The beveled edges of the latch arm create a smooth latching of the door. GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

When releasing the lever, the serrations automatically re-engage.

GN 2282 screw-on levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.

The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. GN605-M8-30-VRN Socket Set Screw GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required.

1 base plates are characterized by their solid construction and large variety..

This allows full clamping of the flat faced ball at all times.

1 base plates are characterized by their solid construction and large variety. GN 36.They are used especially on heavy application and large machines.

This allows full clamping of the flat faced ball at all times.