Ball Valve,PVC Body,2 Pipe Sz

About The 2 in. Range 0 Degrees to 120 Degrees F, Ball Material PVC, Seat Material Buna-N, Stem Type 1-Piece Stem, Handle Type Tee, Handle Material PVC, Stem Material PVC, Body Seal Material Buna-N, Hose I.Ball Valve, Body Material PVC, Body Style 2-Way, 1-Piece, Pipe Size 2 in, Tube Size 2 in, Connection Type IPS x IPS, Full T Port, Max

2 in Range 0 Degrees to 120 Degrees F, Ball Material PVC, Seat Material Buna-N, Stem Type 1-Piece Stem, Handle Type Tee, Handle Material PVC, Stem Material PVC, Body Seal Material Buna-N, Hose I.D. Ball Valve, Body Material PVC, Body Style 2-Way, 1-Piece, Pipe Size 2 in, Tube Size 2 in, Connection Type IPS x IPS, Full T Port, Max. Pressure 150 psi CWP, Temp.

Pipes,Valves & Fittings,Valves,Ball Valves

Expansion Anchor, Anchor Diameter 3/8 in, Overall Length 1 9/16 in, Thread Size 3/8 In.-16, Thread Depth 0.625 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flanged, Drill Bit Size 1/2 in, Minimum Hole Depth 1 9/16 in, System of Measurement Inch, Bolt or Rod Size 3/8 in, Material Grade/Class 1008, Compatible Material Concrete, Removable Removable, Manufacturer Location Globally Sourced, Features Can Be Installed Flush Mounted or Below The Base Material Surface

Range Hood Filter, 8-3/4x10-1/2x3/8

Pipes,Valves & Fittings,Valves,Ball Valves

Specifications of Ball Valve,PVC Body,2 Pipe Sz
Category
Instock	instock

Last Updated May 1st, 2024 09:43 am

More Varieties

Rating :- 9.94 /10

Votes :- 22

Tarp, Tarp Material Polyethylene, Cut Size 10 x 12 ft, Finished Size 10 x 12 ft, Tarp Finished Length 12 ft, Tarp Finished Width 10 ft, Tarp Seam Finish Single Stitched, Web Reinforced, Tarp Resistant Features Mildew Resistant, Tear Resistant, UV Resistant, Tarp Strength Standard Duty, Water Resistant/Waterproof None, Color Green, Grommet Material Brass, Grommet Spacing 24 in, Fabric Weight 5.8 oz/sq yd, Thickness 10 mil, Breathable No, High-Visibility No, Insulated No

Mesh Tarp, 10 x 12 ft, 10 mil, Polyethylene, Standard Duty, Green.

Canopies,Coverings & Outdoor Structures,Tarps

ZORO SELECT

Top Hook Assembly, Product Type Top Hook Assembly, Compatible Hoist Type Manual Chain Hoists, Compatible Load Capacity 4,000 lb, Compatible Series Dayton, Material Steel, Overall Length Not Applicable, Overall Width 4.3 in, Overall Height 6.5 in, Includes Hook with Safety Latch

Top Hook Assembly.

Lifting,Pulling & Positioning,Lifting Equipment,Hoists

DAYTON

Hand Chain Hoist, Product Type Hand Chain, Compatible Hoist Type Manual Chain Hoists, Compatible Lift Height 20 ft, Compatible Load Capacity 6,000 lb, Compatible Series Dayton, Overall Length 38.06 ft

Hand Chain Hoist.

Lifting,Pulling & Positioning,Lifting Equipment,Hoists

DAYTON

Leather Gloves, Hand Protection Style Glove, Additional Hazard Protection None, ANSI/ISEA Heat Level Not Available, Leather Glove Style Work, ANSI/ISEA Impact Level Not Tested, Finger Coverage Full Finger, Insulated Yes, Leather Coverage Style Leather Palm, Glove Length 10 3/4 in, Glove Hand Style Left and Right, Thumb Style Wing, Glove Insulation Material Thinsulate(TM), Cuff Style Safety, Glove Liner Material Thinsulate(TM), Leather Grade Premium, Oil-Resistant No

Fitter Glove Grain Cowhide Lined Thinsulate C100, Size X2L.

Personal Protective Equipment (PPE),Gloves & Hand Protection,Leather Palm Gloves

BDG

Disposable Gloves, Acceptable Quality Level (AQL) 1.5, Anti-Static No, Color Orange, Cuff Style Beaded, Cuff Thickness 6 mil, Disposable Glove Type Chemical-Resistant, General Purpose, Finger Thickness 6 mil, Latex-Free Yes, Length 9 1/2 in, Material Nitrile, Palm Thickness 6 mil, Powdered/Powder-Free Powder-Free, Silicone-Free Yes, Standards EN 374-1, EN 374-2, EN 374-5, EN 455, EN 1186, Sterile/Non-Sterile Non-Sterile, Texture Fish Scale, Accelerator-Free No, EN ISO 374 Type Type B

Disposable Gloves, Nitrile, Orange, 50 PK.

Personal Protective Equipment (PPE),Gloves & Hand Protection,Disposable Gloves

BDG

Coated Gloves, Glove Style Knit, Knit Material Nylon, ANSI/ISEA Abrasion Level Not Rated, Hand Protection Style Glove, Additional Hazard Protection None, Base Coating Material Foam Nitrile, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Dipped, Glove Performance High Dexterity, 1 Pair

15G Nylon Liner Nitrile Palm Dipped, Size M (8).

Personal Protective Equipment (PPE),Gloves & Hand Protection,Coated Gloves

BDG

Range Hood Filter, 8-3/4x10-1/2x3/8

Range Hood Filter, Style - Air Filters Panel, Rectangular, Nominal Filter Size 9x11x1, Media Material Aluminum, Air Filter Construction Mesh, Frame or Header Material Aluminum, For Use With (Systems) Broan, Caloric, Nautilus, Roper, Sears, Tappan, Media Color Silver, Air Flow @ 300 fpm 191 cfm, Max.. Velocity 500 fpm, Nominal Height 9 in, Nominal Width 11 in, Nominal Depth 1 in, Actual Filter Size 8-3/4 in x 10-1/2 in x 3/8 in, Actual Height 8 3/4 in 275 Degrees F, Max.Temp.

Filters,Steel Filters

AIR HANDLER