Turning Toolholder,SDJCR 103C

Name: Turning Toolholder,SDJCR 103C - KYOCERA
Brand: KYOCERA
SKU: CBFX-1589113
Price: 87.75 USD
Availability: InStock

About The Turning Toolholder,SDJCR 103C

Cutting Tools,Indexable Tools,Indexable Toolholders

Turning Toolholder,SDJCR 103C

IEC Supplementary Protector, 32 A, 277/480V AC, 2 Pole, DIN Rail Mounting Style, FAZ Series

ToolHolder

Cutting Tools,Indexable Tools,Indexable Toolholders

Specifications of Turning Toolholder,SDJCR 103C
Category
Instock	instock

Last Updated May 2nd, 2024 07:52 am

More Varieties

Rating :- 9.85 /10

Votes :- 19

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

16 mm, Nominal Width 2. Range -15 Degrees to 400 Degrees F, FDA Approved No, Package Quantity 10 O-Ring,Viton,21mm OD,PK10. 21 mm, Temp.5 mm, Actual Inside Dia.

Sealing & Gasketing,Individual & Bulk O-Rings

ZORO SELECT

Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 15 mm, Bore Diameter 2 10 mm, Coupling Material Aluminum, Coupling Outside Diameter 38.1 mm, Maximum Speed 6,000 RPM, Maximum Torque 10.73 N-m, Axial Motion 0.38 mm, Overall Length 57.2 mm, Parallel Misalignment 0.76 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 2.56 N-m/Deg, Bore Type Round, Shaft Locking Type Set Screw, Number of Beams 6, Length Through Bore 2 27.3 in

Coupling,6 Beam Set Screw,15mmx10mm.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Rigid Clamp Couplings

RULAND

Socket Flat Head Screw, Head Type Flat, System of Measurement Inch, Drive Type Socket, Drive Size 3/32 in, Material Steel, Finish Chrome Plated, Thread Size #8-32, Minimum Thread Length 5/8 in, Fastener Length 3/4 in, Head Height 0.112 in, Head Diameter 0.312 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle 82 Degrees , Dimensional Standards ASME B18.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable

#8-32 Socket Head Cap Screw, Chrome Plated Steel, 3/4 in Length, 5 PK.

Screws & Bolts,Socket Head Cap Screws

ZORO SELECT

Diamond Turning Insert, Inscribed Circle 5/32 in, TiAlN, ANSI Code CDHB 1.2060 UD21, Clearance Angle 15 Degrees

0040 in, Carbide.Diamond Turning Insert, Diamond, 5/32 in, CDHB, 80 Degrees, 0.

Cutting Tools,Indexable Tools,Rhombic Turning Inserts

ULTRA-DEX USA

Carbide Insert, Inscribed Circle 1/4 in, TiAlN

Carbide Insert, Trigon, 1/4 in, WCMT, 1/64 in, Carbide.

Cutting Tools,Indexable Tools,Trigon Turning Inserts

ULTRA-DEX USA

Combination Wrench, Alloy Steel, Black Oxide, Head Size 3/4 in, Overall Length 9 3/4 in, Head Offset Angle 15 Degrees , Opening Angle (Deg.) 15 Degrees , Offset, Head Thickness 7/16 in, SAE, Rounded

Combination Wrench,SAE,3/4in Size.

Hand Tools,Wrenches,Combination Wrenches

WESTWARD

ToolHolder

Turning Toolholder,DDJNL 124B.

Cutting Tools,Indexable Tools,Indexable Toolholders

KYOCERA