reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Anchors,Concrete Anchors,Wedge Anchors
DEWALT

Power-Stud+ SD1 Wedge Anchor, 3/4 Dia., 10 L, Carbon Steel Zinc Plated, 10 PK

About The Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 10 in, Thread Length 7 1/2 in, Material Steel, Material Grade/Class Medium Carbon, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 3/8 in, Minimum Material Thickness 6 in, Nut Width 1.125 in, Washer Outside Diameter 1

Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 10 in, Thread Length 7 1/2 in, Material Steel, Material Grade/Class Medium Carbon, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 3/8 in, Minimum Material Thickness 6 in, Nut Width 1.125 in, Washer Outside Diameter 1.4688 in, Wedge Anchor Type Wedge Anchor, Seismic Approved Yes, ICC Approved for Cracked Concrete Yes

Anchors,Concrete Anchors,Wedge Anchors

Power-Stud+ SD1 Wedge Anchor, 3/4 Dia., 10 L, Carbon Steel Zinc Plated, 10 PK

Hiker Boot, Style Family Hiker Boot, Metatarsal Guard No, ASTM Standards Met Compression (C/75), Impact (I/75), Closure Lace Up, Chemical Resisting Sole No, Color Brown, Width M, Gender Men's, Heel Definition Flat Heel, Non Metallic Upper Yes, Non-Marking Sole No, Completely Non Metallic No, Oil Resisting Sole Yes, Construction Cemented, Electrical Hazard Rated Yes, Conductive No, Color Family Brown, Puncture Resistant Insole No, Size (PRINT) 10, Static Dissipative No, Style Number N9546
Rigid Cell Air Filter, Style - Air Filters Box, Performance Rating MERV 14, Nominal Filter Size 24x24x12, Filter Efficiency - Air Filters 95 Percent, Media Material Fiberglass, Frame or Header Material Galvanized Steel, Air Filter Header Type No Header, Gasket Location None, Gasket Material None, Media Color Pink, Media Area 50 sq ft, Media Separator Construction Metal Pleat
More from DEWALT :- Power-Stud+ SD1 Wedge Anchor, 3/4" Dia., 10" L, Carbon Steel Zinc Plated, 10 PK
Search

Anchors,Concrete Anchors,Wedge Anchors

Specifications of Power-Stud+ SD1 Wedge Anchor, 3/4 Dia., 10 L, Carbon Steel Zinc Plated, 10 PK

Category
Instockinstock

Last Updated

Power-Stud+ SD1 Wedge Anchor, 3/4 Dia., 10 L, Carbon Steel Zinc Plated, 10 PK
More Varieties

Rating :- 9.27 /10
Votes :- 21
Chain Stopper, 0.75 Tons

Chain Stopper, 0.75 Tons

Model Number HRH-0.

  • Lifting,Pulling & Positioning,Lifting Equipment,Hoists
  • DAYTON
    • Top Hook Assembly, Product Type Top Hook Assembly, Compatible Hoist Type Manual Chain Hoists, Compatible Load Capacity 6,000 lb, Compatible Series Dayton, Material Steel, Overall Length Not Applicable, Overall Width 5.1 in, Overall Height 8.3 in, Includes Hook with Safety Latch
  • Lifting,Pulling & Positioning,Lifting Equipment,Hoists
  • DAYTON
    • Cable,1/4 In,L 250 Ft,WLL 1640 Lb

    Cable,1/4 In,L 250 Ft,WLL 1640 Lb

    1/4 in, Length 250 ft, Working Load Limit 1,640 lb, Wire Rope End Type None Cable, Material Galvanized Steel, Uncoated, Coating Material None, Strand Type 1 x 19, Cable Size 1/4 in, Outside Dia..

  • Lifting,Pulling & Positioning,Chains,Ropes & Cables,Wire Rope & Cable
  • DAYTON
    • Leather Gloves, Hand Protection Style Glove, Additional Hazard Protection None, ANSI/ISEA Heat Level Not Available, Leather Glove Style Drivers, ANSI/ISEA Impact Level Not Tested, Finger Coverage Full Finger, Insulated Yes, Leather Coverage Style Full Leather, Standards ANSI/ISEA 105, Glove Length 10 in, Glove Hand Style Left and Right, Thumb Style Keystone, Glove Insulation Material Thinsulate(TM), Cuff Style Shirred Slip-On, Glove Liner Material Unlined, Leather Grade Premium, Oil-Resistant No
  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Leather Palm Gloves
  • BDG
    • Mechanics Gloves, Glove Style Cut and Sewn, Palm Style Single Layer, Backing Style Spandex with Neoprene Knuckle Padding, Cuff Style Hook-and-Loop, Palm Material Synthetic Leather, Glove Back Material Spandex(R), Glove Construction Cut and Sewn, Knuckle Protection Material Neoprene, 1 Pair
  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Mechanics Gloves
  • BDG
    • Filter Pad Holding Frame, Actual Height 14 1/2 in, Actual Width 19 1/2 in, Actual Depth 3/4 in, Frame or Header Material Galvanized Steel, For Use With Filter Pad, Nominal Filter Size 15x20x1, Nominal Height 15 in, Nominal Width 20 in, Nominal Depth 1 in, Filter Pad Holding Frame
  • Filters,Filter Frames,Clips & Gaskets
  • AIR HANDLER
    • Rigid Cell Air Filter, Style - Air Filters Box, Performance Rating MERV 14, Nominal Filter Size 24x24x12, Filter Efficiency - Air Filters 95 Percent, Media Material Fiberglass, Frame or Header Material Galvanized Steel, Air Filter Header Type No Header, Gasket Location None, Gasket Material None, Media Color Pink, Media Area 50 sq ft, Media Separator Construction Metal Pleat
  • Filters,HVAC Cartridge Filters
  • AIR HANDLER
    • Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 10 in, Thread Length 7 1/2 in, Material Steel, Material Grade/Class Medium Carbon, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 3/8 in, Minimum Material Thickness 6 in, Nut Width 1.125 in, Washer Outside Diameter 1.4688 in, Wedge Anchor Type Wedge Anchor, Seismic Approved Yes, ICC Approved for Cracked Concrete Yes
  • Anchors,Concrete Anchors,Wedge Anchors
  • DEWALT
    • Rigid Cell Air Filter, Style - Air Filters Box, Performance Rating MERV 14, Nominal Filter Size 24x24x12, Filter Efficiency - Air Filters 95 Percent, Media Material Fiberglass, Frame or Header Material Galvanized Steel, Air Filter Header Type No Header, Gasket Location None, Gasket Material None, Media Color Pink, Media Area 50 sq ft, Media Separator Construction Metal Pleat
  • Filters,HVAC Cartridge Filters
  • AIR HANDLER
    • Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 10 in, Thread Length 7 1/2 in, Material Steel, Material Grade/Class Medium Carbon, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 3/8 in, Minimum Material Thickness 6 in, Nut Width 1.125 in, Washer Outside Diameter 1.4688 in, Wedge Anchor Type Wedge Anchor, Seismic Approved Yes, ICC Approved for Cracked Concrete Yes
  • Anchors,Concrete Anchors,Wedge Anchors
  • DEWALT