reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Nuts,Push Nuts
MIDWEST FASTENER

4mm X 11mm Zinc Plated Steel Push Nut Washers 20PK

About The .Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place.

Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place. It can be pushed or lightly tapped into place and requires cutting to remove.

Nuts,Push Nuts

4mm X 11mm Zinc Plated Steel Push Nut Washers 20PK

Nuts,Push Nuts

Specifications of 4mm X 11mm Zinc Plated Steel Push Nut Washers 20PK

Category
Instockinstock

Last Updated

4mm X 11mm Zinc Plated Steel Push Nut Washers 20PK
More Varieties

Rating :- 9.63 /10
Votes :- 21
HY-KO A00465 No Soliciting House Plaque Address Plate 3.8" x 8.25", 3PK
  • Signs & Labels,Signs,Security & Access Signs
  • HY-KO
    • Toggle Bolt, 3 L, Steel

    Toggle Bolt, 3 L, Steel

    A machine screw, also called a stove bolt, is generally a smaller fastener threaded the entire length of its shank. Commonly used with flat or lockwashers. Especially useful in metal-to-metal or where heavy duty fastening is required..

  • Anchors,Hollow Wall Anchors
  • MIDWEST FASTENER
    • A hex cap screw has a hexagonal head, designed to be driven by a wrench.

    A hex cap screw has a hexagonal head, designed to be driven by a wrench.

    1/2"-13 Hex Head Cap Screw, Silicon Bronze, 2 in L, 2 PK.

  • Screws & Bolts,Hex Head Cap Screws
  • MIDWEST FASTENER
    • A cotter pin is a split pin with two tines that are bent during installation used to fasten metal together, like with a staple or rivet.
  • Pins,Cotter Pins
  • MIDWEST FASTENER
    • A shoulder screw differs from machine screws in that the shank is ground to a precise diameter, known as the shoulder, and the threaded portion is smaller in diameter than the shoulder.

    A shoulder screw differs from machine screws in that the shank is ground to a precise diameter, known as the shoulder, and the threaded portion is smaller in diameter than the shoulder.

    Shoulder bolt specifications call out the shoulder diameter, shoulder length, and threaded diameter; the threaded length is fixed, based on the threaded diameter, and usually quite short. It is usually used for revolving joints in mechanisms and linkages; when used as a guide for the stripper plate in a die set its called a stripper bolt.

  • Screws & Bolts,Shoulder Bolts
  • MIDWEST FASTENER
    • 1/4-20 x 4 Coarse Thread Carriage Bolts 5PK
  • Screws & Bolts,Carriage Bolts
  • MIDWEST FASTENER
    • 4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK

    4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK

    It can be pushed or lightly tapped into place and requires cutting to remove. Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place..

  • Nuts,Push Nuts
  • MIDWEST FASTENER
    • A cotter pin is a split pin with two tines that are bent during installation used to fasten metal together, like with a staple or rivet.
  • Pins,Cotter Pins
  • MIDWEST FASTENER
    • 4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK

    4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK

    It can be pushed or lightly tapped into place and requires cutting to remove. Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place..

  • Nuts,Push Nuts
  • MIDWEST FASTENER
    • A cotter pin is a split pin with two tines that are bent during installation used to fasten metal together, like with a staple or rivet.
  • Pins,Cotter Pins
  • MIDWEST FASTENER