DRAW TITE 75038 Max-Frame Class Iii - Iv 2 In. Square Receiver Hitch

Hitches that are used for weight distributing are rated up to 15000 Pounds. Class IV hitches are Weight Carrying(WC) and Weight Distributing(WD) hitches depending on the vehicle and hitch specifications. This style of hitch typically uses a 2 Inch square receiver opening. Gross Trailer Weight(GTW) with a maximum Trailer Tongue Weight(TW) of 1500 Pounds. To use the weight distribution side of the hitch a weight distribution system is required. Class IV Hitches attach to the vehicle frame onlySpecificationsWeight - 38.4000Class - III/ IVGross Trailer Weight (LB) - 5000 PoundsGross Tongue Weight (LB) - 500 PoundsReceiver Size (IN) - 2 InchIncludes Ball Mount - NoConstruction - Square Tube WeldedDrilling Required - YesCutting Required - NoFinish - Powder CoatedColor - BlackMaterial - SteelFor Use With Roll Pan - NoApplicationsFits For Various Makes and Models Gross Trailer Weight(GTW) with a maximum Trailer Tongue Weight(TW) of 1200 Pounds. Not all Class IV hitches are rated to be both. The use of a ball mount and hitch ball of the same rating or higher is required for weight carrying. Class IV Hitches is very similar to Class III Hitches except for the weight ratings. The hitch specifications will alert you to a hitch that is not weight distributing. Class IV hitches used as weight carrying is rated up to 12000 Pounds.

Trailer,Plow & Towing Equipment,Trailer & Towing Hitches,Trailer Hitches

DRAW TITE 75038 Max-Frame Class Iii - Iv 2 In. Square Receiver Hitch