Slit Coupling, Clamp, Short, Bores 10mmx0.375, OD 0.984, Aluminum
About The 0mm) OD, and 1. This short style slit coupling can fit in confined spaces where the long style may not fit. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings
It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This short style slit coupling can fit in confined spaces where the long style may not fit. This slit coupling is manufactured by Reliance Precision Ltd. It is clamp style and has 10mm x 0.375" bores, 0.984" (25.0mm) OD, and 1.016" (25.80mm) length. in their facility in County Cork, Ireland and is RoHS and REACH compliant. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 5,000 RPM.
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
Slit Coupling, Clamp, Short, Bores 10mmx0.375, OD 0.984, Aluminum
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
Specifications of Slit Coupling, Clamp, Short, Bores 10mmx0.375, OD 0.984, Aluminum | |
|---|---|
| Category | |
| Instock | instock |
