ALWAYS ^{Be Happy}

Categories

Play Games ^New

HVACR and Appliance Controls,Steam Traps

ARMSTRONG INTERNATIONAL

Steam Trap,800F,304L Stainless Steel

About The Steam Trap, Max. 800 Degrees F, Type Inverted Bucket, Body Material 304L Stainless Steel, Pipe Configuration Requires Connector Block, Application Steam. Temp

800 Degrees F, Type Inverted Bucket, Body Material 304L Stainless Steel, Pipe Configuration Requires Connector Block, Application Steam Operating PSI 125 psi, End to End Length 3 15/16 in, Condensate Capacity Lbs/Hr 850 lb/hr, Max. Temp. Steam Trap, Max.

HVACR and Appliance Controls,Steam Traps

Steam Trap,800F,304L Stainless Steel

Speed Reducer, Input Connection Type Indirect Drive, Gear Type Worm, Output Shaft Type Round, Maximum Output Speed 345 RPM, Worm Center Distance 1.33 in, Base to Center 1.75 in, Gear Ratio 5:1, Rotation CW/CCW, Maximum Input Horsepower 1 hp, Maximum Output Torque 171 in-lb, Overhung Load Capacity 290 ft-lb, Mounting Orientation Any Angle, Housing Material Cast Iron, Housing Material Finish Epoxy Coating System

Point SV870 Hardslick Coated Carbide SV Point, Carbide, PVD, 0, 3.2 mm, Measurement System Metric, ANSI Code SV870175

More from ARMSTRONG INTERNATIONAL | Operating PSI 125 Psi, End To End Length 3 15/16 In, Condensate Capacity Lbs/Hr 850 Lb/hr, Max.

HVACR and Appliance Controls,Steam Traps

Specifications of Steam Trap,800F,304L Stainless Steel
Category
Instock	instock

Last Updated May 9th, 2024 04:36 am

Steam Trap,800F,304L Stainless Steel

Rating :- 9.79 /10

Votes :- 22

Anti-Slip Tread, Black, 2 in, 24 in, Grit Size Proprietary, Solid, Fluorescent No, Abrasive Grade Very Coarse, Tape Adhesive Material Acrylic, Tape Brand Wooster, Flex-Tred(R), Environment Indoor and Outdoor, Legend No Legend, Glow In The Dark No, Package Quantity 50

Anti-Slip Tape,Flat Black,2in x 2ft,PK50.

Facility & Worksite Safety,Anti-slip tapes,Treads & Stair Nosings

WOOSTER PRODUCTS

Square End Mill,Single End,1/2,Cobalt

1/2 in Square End Mill, 1/2 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 1/2 in, Overall Length 2 1/2 in, Shank Dia.

Cutting Tools,End Mills,Square 3-Flute End Mills

Square End Mill,Single End,1-3/4,HSS

, High Speed Steel, TiCN, Weldon Flat, Length of Cut 2 in, Overall Length 4 1/2 in, Shank Dia.1 1/4 in Square End Mill, 1 3/4 in Milling Dia.

Cutting Tools,End Mills,Square 2-Flute End Mills

Point SV825 H-Coated Carbide SV Point, Carbide, PVD, 0, 3.2 mm, Measurement System Fractional Inch, ANSI Code SV825038

Point SV825 H-Coated Carbide SV Point.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Point SV825 H-Coated Carbide SV Point, Carbide, PVD, 0, 3.2 mm, Measurement System Fractional Inch, ANSI Code SV825038

Point SV825 H-Coated Carbide SV Point.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts