ALWAYS ^{Be Happy}

Categories

Play Games ^New

Cutting Tools,Drill Bits,Masonry Drill Bits

Masonry Bit,1/4 In,4 In L,1/4 Shank

About The Round Hammer Drill, Straight, 1/4 in, Carbide Tipped, 4 in Overall Length, Maximum Drilling Depth 2 3/4 in, Shank Diameter 1/4 in, Bright (Uncoated)

Round Hammer Drill, Straight, 1/4 in, Carbide Tipped, 4 in Overall Length, Maximum Drilling Depth 2 3/4 in, Shank Diameter 1/4 in, Bright (Uncoated)

Cutting Tools,Drill Bits,Masonry Drill Bits

Masonry Bit,1/4 In,4 In L,1/4 Shank

Shell Mill Holders,220.00 mm L

More from Round Hammer Drill, Straight, 1/4 In, Carbide Tipped, 4 In Overall Length, Maximum Drilling Depth 2 3/4 In, Shank Diameter 1/4 In, Bright (Uncoated) - WESTWARD

Cutting Tools,Drill Bits,Masonry Drill Bits

Specifications of Masonry Bit,1/4 In,4 In L,1/4 Shank
Category
Instock	instock

Last Updated May 3rd, 2024 11:22 pm

Masonry Bit,1/4 In,4 In L,1/4 Shank

Rating :- 9.91 /10

Votes :- 22

Plastic Sheet Stock, HDPE, Marine, Plastic Length 12 in, Plastic Width 1.5 in, Plastic Thickness 0.75 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good

Black HDPE Plastic Sheet Stock 12" L x 1-1/2" W x 3/4" Thick.

Plastics,Plastic Sheets

Triangle Turning Insert, Inscribed Circle 1/2 in, TiN

001 in, Carbide.Triangle Turning Insert, Triangle, 1/2 in, TNMA, 0.

Cutting Tools,Indexable Tools,Triangle Turning Inserts

Indexable Drill,UD-0937-2D-075

Indexable Insert Drill, Max.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Diamond Turning Insert, Chip-Breaker Code LX6, Inscribed Circle 7/32 in, Bright (Uncoated), ANSI Code CPMT 1.81.205 UD2, Clearance Angle 11 Degrees

Diamond Turning Insert, Diamond, 7/32 in, CPMT, 80 Degrees, 0.0080 in, Carbide.

Cutting Tools,Indexable Tools,Rhombic Turning Inserts

Diamond Turning Insert, Chip-Breaker Code LX6, Inscribed Circle 7/32 in, Bright (Uncoated), ANSI Code CPMT 1.81.205 UD2, Clearance Angle 11 Degrees

Diamond Turning Insert, Diamond, 7/32 in, CPMT, 80 Degrees, 0.0080 in, Carbide.

Cutting Tools,Indexable Tools,Rhombic Turning Inserts