reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Cutting Tools,Taps,Straight Flute 3-Flute Taps
WIDIA GTD

Straight Flute Hand Tap , #3-48 , Bottoming , 3 Flutes, UNC

About The Straight Flute Tap, Thread Size #3-48, UNC, Bottoming, Overall Length 1 13/16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size 2.00 mm, Thread Limit H2

Straight Flute Tap, Thread Size #3-48, UNC, Bottoming, Overall Length 1 13/16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size 2.00 mm, Thread Limit H2

Cutting Tools,Taps,Straight Flute 3-Flute Taps

Straight Flute Hand Tap , #3-48 , Bottoming , 3 Flutes, UNC

More from WIDIA GTD, Straight Flute Tap, Thread Size #3-48, UNC, Bottoming, Overall Length 1 13/16 In, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1/2 In, 75 Percent Thread Drill Size 2.00 Mm, Thread Limit H2
Search

Cutting Tools,Taps,Straight Flute 3-Flute Taps

Specifications of Straight Flute Hand Tap , #3-48 , Bottoming , 3 Flutes, UNC

Category
Instockinstock

Last Updated

Straight Flute Hand Tap , #3-48 , Bottoming , 3 Flutes, UNC
More Varieties

Rating :- 9.57 /10
Votes :- 17
Engine Oil, Series BioSynthetic, Container Size 1 gal, Base Formulation Bio-based, SAE Viscosity Grade 5W-40, Standards ASTM, USDA, Biodegradable Biodegradable, Color Yellow, Container Type Jug, Features High-Performance, Energy-Conserving SAE Gas and Diesel Motor Oil for Turbo/Supercharged Engines, Flash Point 453 Degrees F, ISO Viscosity Grade Not Specified, Odor Mild, Pour Point -40 Degrees F, Specific Gravity 0.89 at 60.1 Degrees F, Viscosity @ 100 Deg C 15 cSt, Viscosity @ 40 Deg C 84.3 cSt
  • Automotive Fluids & Chemicals,Motor Oil
  • RENEWABLE LUBRICANTS
    • Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1/3 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 140 psi, Maximum Flow Rate 2.5 gpm, Flow Rate @ 10 psi 2.5 gpm, Flow Rate @ 20 psi 2.6 gpm, Flow Rate @ 30 psi 2.3 gpm, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in, Discharge Type NPT, Motor Type Capacitor-Start/Run, Best Efficiency Head 85 ft, Case Pressure (Maximum) 200 psi
  • Centrifugal Pumps,Turbine Pumps
  • DAYTON
    • Tubing Fitting, Application Air, Inert Gases, Vacuum, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type Push-to-Connect, Fitting Side A Tube Outer Diameter 1/2 in, Fitting Side B Tube Outer Diameter 1/2 in, Fitting Material Polyamide, Color Black, Maximum Operating Pressure 232 psi, Maximum Operating Temperature 140 Degrees F, Overall Length 2 5/16 in, Specific Fitting Shape 90 Degrees Elbow, Release Type Ring
  • Compressors,Air Tanks & Pneumatic Parts,Hose Fittings,Quick Connect Fittings
  • TRANSAIR
    • Tubing, Application Air, Beverages, Food, Water, Color Clear, Food Application Food and Beverage, Hardness Shore A 73, Inside Diameter 1 1/4 in, Jacket Material No Jacket, Material PVC, Material Trade Name Klearon, Maximum Operating Pressure 20 psi @ 70 Degrees F, Maximum Operating Temperature 150 Degrees F, Outside Diameter 1 1/2 in, Overall Length 50 ft, Peristaltic Pump Compatible No, PEX Type Not Applicable, Resistance Properties Chemical Resistant, Reinforcement Not Reinforced
  • Pipes,Valves & Fittings,Tubing,PVC Tubing
  • KURIYAMA
    • Tubing, Application Air, Beverages, Food, Water, Color Clear, Food Application Food and Beverage, Hardness Shore A 73, Inside Diameter 1 1/4 in, Jacket Material No Jacket, Material PVC, Material Trade Name Klearon, Maximum Operating Pressure 20 psi @ 70 Degrees F, Maximum Operating Temperature 150 Degrees F, Outside Diameter 1 1/2 in, Overall Length 50 ft, Peristaltic Pump Compatible No, PEX Type Not Applicable, Resistance Properties Chemical Resistant, Reinforcement Not Reinforced
  • Pipes,Valves & Fittings,Tubing,PVC Tubing
  • KURIYAMA